Mini Fluid Bed Dryer (20 kg - 50 L)

Mini Fluid Bed Dryer (20 kg - 50 L)

 

Technical Specifications of Mini Fluid Bed Dryer (20 kg - 50 L)
MODEL 20 KGS. (GMP  MODEL)
PRODUCT CONTAINER
M.O.C. S.S. AISI 316 quality
Thickness 2 mm
Bottom Screen 24 x 110 mesh
Viewing Window Dia 75mm  qty 01 no.
Sampling Port Provided
Trolley Provided
Container lifting & Sealing Pneumatic
Volume in Ltrs 50 Ltrs.
EXPANSION CHAMBER
M.O.C. S.S. AISI 316 quality
Thickness 2 mm
Viewing Window Dia  75 mm  qty 1 no
Gasket Lower end Flange will hold Neoprene / Silicon Rubber Gasket.
FINGER BAG CHAMBER
M.O.C. S.S. AISI 316 quality
Thickness 2  mm thick.
Filtration media P.P. Filter Bag.
Pressure Flap Provided to release excess pressure developed, made out of rubberised champion sheet or Alluminium / S.S. Sheet.
Bag Shaking Auto Bag Shaking can be provided
Viewing Window Dia 75mm  qty 01 no.
TOP DISH
M.O.C. S.S. AISI 316 quality
Thickness 2 mm thick.
BLOWER ASSEMBLY
Type Centrifugal.
M.O.C. S.S. AISI 304 quality
Motor 3 HP,  RPM ISI Make Motor
Mounting Total blower assembly with motor mounted on Top dish.
Damper Provided between Top dish and Blower assembly with Pneumatic Auto Bag Shaking
REAR CHAMBER
M.O.C. S.S. AISI 304 quality
Thickness 2 mm thick.
Heater Finned tube Electrical Heater.
M.O.C. of Heater S.S. AISI 304 quality
Heat Transfer Area 0.36 m2
Air Filter HDPE Air Cleanable.
PLENUM CHAMBER (BOTTOM CHAMBER) :
M.O.C. S.S. AISI 304 quality
Thickness 2 mm thick.
Drain Washing drain will be provided with topper bottom to drain out all wash water.
CONTROL PANEL
1) R, Y, B
2) Digital Temperature Controller –
3)Digital Temperature Indicator –
4)Motor Timer (Process Timer)
5)Shaking by Pneumatic
6) Main On & Off Switch
STRUCTURE
Square S.S 304 Pipe OR ‘I’ Beam structure will be provided to mounted total equipment.
Applications of Mini Fluid Bed Dryer (20 kg - 50 L)
Features of Mini Fluid Bed Dryer (20 kg - 50 L)