Fluid Bed Dryer - Manufacturer & Exporter

Drying, cooling, coating, agglomeration and granulation of particulate materials could be done in Fluid bed dryer unit by changing the container conveniently.

The laboratory model of fluid bed dryer is used widely for small scale pharmaceutical product research and development and is ideal for a wide range of heat sensitive and non-heat sensitive products.

The heat may be supplied by either fluidization gas, heating panels or tubes immersed in the fluidized product layer, during fluid bed drying process. Liquid is sprayed on fluidized powder during the fluid bed coating of powder, granules, tablets, and spheroids.

The fluid bed dryer laboratory model is developed from the perspective of development and experimental work specifically where the material available is in limited quantity or very expensive. In the early stage of drug development where both the above mentioned situations are common, our lab model of fluid bed dryer gives a high quality of processing to a small quantity of powder, granules, tablets, or spheroids.

Technical Specification

TYPE	SDF – 1
ELECTRIC MOTOR	0.25 HP, 1440 RPM, 440 V, 3 PHASES, 50 HZ.
CAPASITY  [STRIP WIDTH]	40 TO 90 MM.
OUT PUT	800 TO 1800 STRIPS / HOUR DEPENDING UPON  STRIPS SIZE
OVERALL DIMENSIONS	32” X  22” X  26” - HEIGHT
NET WEIGHT	95 KGS

Applications

The fluid bed dryer laboratory model is primarily developed for pharmaceutical industry, it could also utilized for processing chemical, bio chemical, polymer, food and dairy products.

Features

Flame Proof Electrical.
Safe earthing device with low Vi HEPA Filters.
Sampling port on product contact.
Dehumidification of inlet air.
Manually operated air dampers provided to control the inlet and outlet air flow.
Automatic shaking arrangements.
PLC Controls with Touch Monitor.
Solid Particle Flow Monitor.
Available capacity of Fluid Bed Kgs. Ltr. 10 to 300 Kgs.
Uniformity in drying and reduction in drying time.
Minimum handling and more hygienic.