Colloid Mill

Colloid mill is used for Shearing, mixing, and reduction of particles to achieve uniform dispersions and stable emulsions. Colloid mill machine minimizes the particle size of solid in suspension in a liquid or homogenizes the liquids of different properties by minimizing the size of droplets. The high level of hydraulic shear is applied to process the liquid which increases the stability of suspensions and emulsions.

Colloid mill is developed for pharmaceutical industry and is also used in other industries while processing flavor emulsions, mayonnaise, buttered syrups in food industry and lipsticks, creams, ointments, toothpastes in cosmetics industry. It comes in standard and GMP models. All the contact parts are made from SS 316. The model jacketed model for use with hot or cold water is also available. The jacketed model is highly recommended while processing the material which generates extreme heat during the milling operation and with the material which is sensitive to heat.

Ideal design of a colloid mill is rotor and a stator with smooth, ground and lapped faces. With this design, found in the Shakti Pharmatech's Colloid Mill, the thin film of material between them will be of uniform cross section and will be subjected to the maximum amount of shear as it spins around.

Shakti Pharmatech's colloid mill provides a clean trouble-free operation. Easy dismantle of operating parts makes the cleaning of colloid mill requiring less clean-up time. Detailed checkup and cleaning of complete milling chamber is easily finished.

Technical Specification

Model	SCMG
Output	150 to 1500 Liters/hr. Micron- 5 to 10
Motor	3 H.P., 2850 r.p.m., 440volts, 50cycles, 3phase,AC
Teeth of Rotor & Lower Stator for better Result.	100 nos.
Height	1000 mm.
Floor Space	630mm x 1100 mm
Net Weight	140 kg
Gross Weight	220kg.
Case Dimensions	610 x 720 x 1100 mm [L x B x H]

Applications

Colloid mill is used for Shearing, mixing, and reduction of particles to achieve uniform dispersions and stable emulsions.

Features

Simple construction permits the ease of cleaning. Normally, flushing of water or suitable solvent cleans the mill. If required. The operating parts can be easily dismantled for through cleaning or sterilization.
Feed Hopper, recirculation pipe and mouth hopper are supplied as standard with SHAKTI Colloid Mill.
SHAKTI Colloid Mill is available in water Jacketed model also.
Easy to clean and operate.
All contact parts of the mill are made pf stainless steel.
Model with flameproof electrical fitting is available on request.